First time for everything

First time for everything Lads thanks for the advice earlier, loved doing my own work today. Great sense of achievement http://irishmancave.blogspot.com/201…il-change.html Source: First time for everything

Read More »

Honda Hornet 250 stopping when warm

Honda Hornet 250 stopping when warm Hi lads, newcomer to the forums. Recently bought a 1996 Hornet 250, the bike is starting on all 4 cylinders and running perfectly while cold, it’s just moving off cold on the temp. Gauge and goes down to 2 cylinder for a few seconds and then stops, the bike […]

Read More »

Advice needed please

Advice needed please novice here so go easy ! Changing the oil and put in the recommended amount to realise it’s a tad too much so undid the drain bolt and sorted that. As an after thought will the crush washer need to be changed again ? Source: Advice needed please

Read More »

Un seizing pistons

Un seizing pistons What’s the best option for the above in the front left hand side calipar Or would it be a re build with new parts or just a good clean up and re lubing ? Thanks Source: Un seizing pistons

Read More »

Tiger 800 shim adjustment

Tiger 800 shim adjustment Hi all I’m changing the ex shims but the lines on the sprockets seem to be one tooth off! . Should I get them level as the manual says or should I just leave them as I found them and just do the shims. ? Regards PS Can […]

Read More »

Yamaha xt660z

Yamaha xt660z I’m looking for a Yamaha Tenere headlight, anyone got any suggestions? Yamaha want 210 for a new one. I’m struggling to find one in a breakers. Source: Yamaha xt660z

Read More »

Starter or battery

Starter or battery Bike was making strange noise while trying to start and refused to start unless i rolled it in neutral and started it and it worked for a day. So i have a rough idea that it could be starter motor or battery at the time of the issue. Today came […]

Read More »